American Fireglass Drop-In Fire Pit Burner Pan, Linear Trough - Burner Included
2 Reviews
SKU
SS-LCB-Config
Regular Price
$204.00
Special Price
$170.00
Features
- High Output Burner - High BTU ratings from the stainless steel burners ensure a beautiful flame
- Weep Holes - Pre-cut holes help pan drainage, helping to increase the longevity of your burner and burner pan
- Stainless Steel Construction - Durable #304 stainless steel guarantees a quality product
- Central Burner Hub - 1/2" cutout allows burner to easily connect to gas source
- Burner Included - Linear shaped burner included
| Manufacturer | American Fireglass |
|---|---|
| Manufacturer Part Number | SS-LCB-Config |
| Shape | Linear |
| Made in USA | No |
5
/ 52 Reviews
John
February 23
Very nice product
Scott
May 17
Amazing output, better than any burner I have bought in the past, and I have bought many at at price tag over $800, this one works way better for 1/2 the price
Downloads
- Recommended Burner Size - Should be based off of the inside dimensions of your enclosure as well as the available BTU output:
- Give at least 3" in between the edge of the burner and the enclosure, for a total of 6" difference.
- Available BTU will be calculated by a professional and will be based off of available supply pressure, distance from the source, gas line size & material.
- Supply pressure at the fire pit should be between 3.5"-7" Water Column for Natural Gas and 8"-11" W.C. for Propane.
- All gas lines should be sized and installed by a professional based on BTU requirements, distance from the gas source, and local codes.
- Using a Standard 20 lb. Propane Tank - (Commonly used for gas grills) Please consider the following:
- The largest burner size to be used is 18" due to the BTU limitations of the tank.
- You'll need a propane tank regulator that can supply the proper amount of BTU output.
- Completing Your Gas Fire Pit - This burner kit includes the necessary components to complete the burner assembly from the shut off valve, but you may need additional components to complete the construction of your enclosure:
- A burner pan is recommended for all gas fire pits, however it is required for use with all propane gas fire pits.
- The burner pan should be installed at a minimum of 4" below the top of the fire pit and is easy to install using our flexible installation collars.
- The flexible installation collars can be mounted to the inside walls of your enclosure in order to hold up the burner pan.
- Alternatively, a "shelf" may be constructed within the enclosure to support the burner pan using non-combustible materials.
- Proper ventilation must be accounted for within your fire pit enclosure.
- 18in² of venting must be installed on at least (2) opposing sides.
- Vent covers can be used to achieve a clean, professional look and should be installed near the base of the enclosure.
- A valve extender may be necessary if the enclosure is more than 3" thick.
- The extender is composed of a standard 3/4" coupler and 3/4" nipple.
- If using an extender, a longer key will be required.
- How Much Fire Media Do You Need? - Either lava rock or fire glass must be used to complete the construction of your gas fire pit.
- Enough fire media should be used to completely cover the burner by a thin 1/4"-1" layer; typically 2.5"-3.5" achieves proper coverage.
- To determine the amount of lava rock or fire glass, refer to the chart above - or use our Glass Calculators in the "Support" tab.
| AFG Linear Trough Stainless Steel Drop-In Burner Pans w/ Burner | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Model # | Burner Information | Burner Pan Information | ||||||||
| Burner Size | Burner BTU | Burner Hub Size | Pan ID | Pan OD | Lip Size | Pan Depth | Center Hole | Fire Glass | ||
| SS-LCB-30 | 26" | 54,000 | 1/2" | 30" x 6" | 32.5" x 8.5" | 1.25" | 2" | 1/2" | 20 lbs. | |
| SS-LCB-36 | 32" | 65,000 | 1/2" | 36" x 6" | 38.5" x 8.5" | 1.25" | 2" | 1/2" | 30 lbs. | |
| SS-LCB-48 | 44" | 91,000 | 1/2" | 48" x 6" | 50.5" x 8.5" | 1.25" | 2" | 1/2" | 40 lbs. | |
| SS-LCB-60 | 56" | 108,000 | 1/2" | 60" x 6" | 62.5" x 8.5" | 1.25" | 2" | 1/2" | 50 lbs. | |
| SS-LCB-72 | 68" | 125,000 | 1/2" | 72" x 6" | 74.5" x 8.5" | 1.25" | 2" | 1/2" | 60 lbs. | |
| *Recommended Amount | ||||||||||
About the Manufacturer
Located in Lake Elsinore, California, American Fireglass is the world's premier manufacturer of fireplace and fire Pit glass - in addition to the wide variety of gas fire features they offer. Their products can be found in many of the world's most lavish homes, hotels, and restaurants in large part due to the high quality construction and contemporary design. All of American Fireglass' fire glass is made from glass that's been manufactured to guarantee no dangerous edges - what's more, all fire glass products have been quality inspected by highly trained professionals to ensure performance, elegance, and 100% customer satisfaction. Be sure to add American Fireglass' gas fire media to your next fireplace or fire pit project.
WARNING: This product can expose you to chemicals including CARBON MONOXIDE, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
