All products available on our website
qualify for free standard shipping. Standard
shipping applies to standard locations
within the contiguous 48 states. Spotix,
Inc. reserves the right to choose delivery
type, carrier, and service level of each
shipment when standard shipping is selected.
For freight shipments, standard shipping
includes curbside delivery and liftgate
services. Special considerations and fees
may apply to certain delivery exceptions
(e.g. deliveries to hard to reach areas).
Expedited shipping options:
Most items shipped via standard parcel
service may be expedited for an additional
cost to decrease shipping time or guarantee
delivery by a certain date. This does not
include processing time, which may or may
not be altered subject to manufacturer
resources and discretion. Items shipped via
freight are shipped at the fastest available
speed (Priority Freight) and are, therefore,
unable to be expedited further.
American Fireglass Round Oil Rubbed Bronze Pan with Burner offers a premium finished stainless steel round fire pit pan for your fire pit project. Built for durability and longevity, the round bowl pan offer some of the best fire pit components available today. The pan is manufactured from hand crafted, rust-resisting 304 stainless steel and finished with an oil rubbed bronze look. With 2 different size options, these bowl pans from American Fireglass are sure to help you finish your DIY fire pit project.
Heavy Duty Stainless Steel Construction - #304 stainless steel for durability and longevity
Oil Rubbed Bronze Finish - Pan is hard finished with a bronze look
Weep Holes - Pre-cut holes help pan drainage and increase longevity of the unit
Recommended Burner Size - Should be based off of the inside dimensions of your enclosure as well as the available BTU output:
Give at least 3" in between the edge of the burner and the enclosure, for a total of 6" difference.
Available BTU will be calculated by a professional and will be based off of available supply pressure, distance from the source, gas line size & material.
Supply pressure at the fire pit should be between 3.5"-7" Water Column for Natural Gas and 8"-11" W.C. for Propane.
All gas lines should be sized and installed by a professional based on BTU requirements, distance from the gas source, and local codes.
Using a Standard 20 lb. Propane Tank - (Commonly used for gas grills) Please consider the following:
The largest burner size to be used is 18" due to the BTU limitations of the tank.
You'll need a propane tank regulator that can supply the proper amount of BTU output.
Completing Your Gas Fire Pit - This burner kit includes the necessary components to complete the burner assembly from the shut off valve, but you may need additional components to complete the construction of your enclosure:
A burner pan is recommended for all gas fire pits, however it is required for use with all propane gas fire pits.
The burner pan should be installed at a minimum of 4" below the top of the fire pit and is easy to install using our flexible installation collars.
The flexible installation collars can be mounted to the inside walls of your enclosure in order to hold up the burner pan.
Alternatively, a "shelf" may be constructed within the enclosure to support the burner pan using non-combustible materials.
Proper ventilation must be accounted for within your fire pit enclosure.
18in² of venting must be installed on at least (2) opposing sides.
Vent covers can be used to achieve a clean, professional look and should be installed near the base of the enclosure.
A valve extender may be necessary if the enclosure is more than 3" thick.
The extender is composed of a standard 3/4" coupler and 3/4" nipple.
If using an extender, a longer key will be required.
How Much Fire Media Do You Need? - Either lava rock or fire glass must be used to complete the construction of your gas fire pit.
Enough fire media should be used to completely cover the burner by a thin 1/4"-1" layer; typically 2.5"-3.5" achieves proper coverage.
To determine the amount of lava rock or fire glass, refer to the chart above - or use our Glass Calculators in the "Support" tab.
Located in Lake Elsinore, California, American Fireglass is the world's premier manufacturer of fireplace and fire Pit glass - in addition to the wide variety of gas fire features they offer. Their products can be found in many of the world's most lavish homes, hotels, and restaurants in large part due to the high quality construction and contemporary design. All of American Fireglass' fire glass is made from glass that's been manufactured to guarantee no dangerous edges - what's more, all fire glass products have been quality inspected by highly trained professionals to ensure performance, elegance, and 100% customer satisfaction. Be sure to add American Fireglass' gas fire media to your next fireplace or fire pit project.
WARNING: This product can expose you to chemicals including CARBON MONOXIDE, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.