- URL
American Fire Glass SIT Electronic Ignition Fire Pit Kits, Oil Rubbed Bronze Trough Pans
SKU
ORB-LCBSIT-Config
Regular Price
$4,449.00
Special Price
$3,336.75
Product Overview
American Fire Glass SIT Electronic Ignition Fire Pit Kits, Oil Rubbed Bronze Trough Pans is an ideal choice for any outdoor fire pit project. The Smart Ignition Technology (SIT) systems are the best fire pit kits American Fire Glass has to offer - they are designed to provide total electronic control over your fire pit. These kits feature Hot Surface Ignition to electronically control the opening and closing of the gas valve, while a thermopile utilizes an automatic flame sensor in order to provide additional safety. The valve box operates on 24V and includes a 24V transformer that will adapt to normal 110V AC outlets.
The burners are constructed from high quality stainless steel to provide durability and longevity while the burner pan comes in a contemporary Oil Rubbed Bronze finish. The burners feature drilled burner ports to reduce any whistling noise and ensure a quality flame while the pan features weep holes to assist with water drainage and reduce the risk of burner or system damage, and also includes a welded nipple that allows the burner to connect to the gas source. These bowl pans measure 2" deep, with a 1-1/4" lip around the top to easily drop into your custom fire pit enclosure. In addition to the burner and burner pan, included with this fire pit kit is the SIT system, 24V transformer, safety shut-off valve, key valve, (1) 16" and (1) 28" stainless steel flex line.
Gas fire pit pans are a crucial component to maintain the safety and quality of your fire pit. Burner pans help support your burner ring, separate the air mixer from fire pit media (for LP applications), and save money by reducing the amount of fire media you would otherwise need to complete your fire pit. Pans also help to minimize fuel settling below the pan, and help your fire pit drain properly, failure to do so may result in personal injury or explosion.
Features
- High Output Burner - High BTU ratings from the stainless steel burners ensure a beautiful flame
- S.I.T. System - Smart Ignition Technology uses Hot Surface Ignition to electronically control your fire pit
- Electronic Control - Wire your fire pit to be controlled via wall switch, or remote control (optional)
- Oil Rubbed Bronze - A contemporary Bronze finished burner pan
- Weep Holes - Pre-cut holes help pan drainage, helping to increase the longevity of your burner and burner pan
- Stainless Steel Construction - Durable #304 stainless steel guarantees a quality product
- Welded Nipple - 1/2" or 3/4" nipple comes welded to burner pan to easily connect to gas source
- Drilled Burner Ports - Drilled burner ports in the stainless steel burner prevent whistling
- Includes - Burner, pan, S.I.T. ignition box, (1) 16" & (1) 28" stainless steel flex line, safety shut-off valve, key valve, 24V Transformer
| Manufacturer | American Fire Glass |
|---|---|
| Burner Material | #304 Stainless Steel |
| Burner Pan Material | #304 Stainless Steel |
| Burner Pan Type | Trough |
| BTU | 290,000 |
| Ignition | Electronic Ignition |
| Shape | Linear |
What to Consider When Building a Gas Fire Pit:
- Gas Supply - Before you begin designing your fire pit, first determine your gas supply
- Both Natural Gas and Propane may be used - Supply Pressure and BTU ratings need to be regulated for both
- For Natural Gas: Supply Pressure should be set between 3.5" - 7" Water Column
- For Propane*: Supply Pressure should be set between 8" - 11" Water Column
- *Do not use a burner rated for greater than 125,000 BTU with a 20-pound propane tank.
- Fire Pit Burner - The shape and size of your fire pit burner can be choosed after determining your gas supply
- Choose a burner kit based off of the inside dimension of your enclosure - the fire pit pan will be 6" larger than the burner to provide at least 3" between the edge of the burner and the inside edge of the pit
- Fire Pit Pan - Included with all of HPC's preassembled fire pit kits
- A pan can be flat or "bowl" style in order to accommodate your construction - it should be installed at least 3-4" below the top surface of your enclosure
- The burner pan separates the air mixer from the burner in propane applications, but in all constructions it helps with water drainage and ventillation
- Flange Extension - In many cases, the shut-off valve will be located inside the fire pit - if your enclosure walls are thicker than 3" it may be necessary to use a flange extension and a longer key
- An external shut off valve is not required with this kit, but may be an option for added safety
- Ventilation - For all fire pit burners, adequate ventilation is required
- The recommended amount of ventilation is 36in² - or (2) 18in² vents on two opposing sides to create proper airflow
- Installation Collars - Are designed to simplify the installation of a fire pit pan
- Our flexible installation collars can bend for round enclosures and can be anchored in with concrete screws
How Many Installation Collars Do I Need?
Round Pan Size (Diameter)*
Number of Collars
12”
2 Units
18”
3 Units
24”
4 Units
30”
5 Units
36”
6 Units
42”
7 Units
48”
8 Units
54”
9 Units
*NOTE: For square or rectangular enclosures, use enclosure length and width measurements
- Fire Media - Is the final step to finishing a gas fire pit
- Both lava rock and fire glass may be used to complete your fire pit, the choice between the two is purely aesthetic
| AFG Linear S.I.T. Ignition Fire Pit Kits | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Model # | Burner Information | Burner Pan Information | ||||||||
| Burner Size | Burner BTU | Burner Hub Size | Pan ID | Pan OD | Lip Size | Pan Depth | Center Hole | Fire Glass | ||
| SS-LCBSIT-30 | 26" | 54,000 | 1/2" | 30" x 6" | 32.5" x 8.5" | 1.25" | 2" | 1/2" | 20 lbs. | |
| SS-LCBSIT-36 | 32" | 65,000 | 1/2" | 36" x 6" | 38.5" x 8.5" | 1.25" | 2" | 1/2" | 30 lbs. | |
| SS-LCBSIT-48 | 44" | 91,000 | 1/2" | 48" x 6" | 50.5" x 8.5" | 1.25" | 2" | 1/2" | 40 lbs. | |
| SS-LCBSIT-60 | 56" | 108,000 | 1/2" | 60" x 6" | 62.5" x 8.5" | 1.25" | 2" | 1/2" | 50 lbs. | |
| SS-LCBSIT-72 | 68" | 125,000 | 1/2" | 72" x 6" | 74.5" x 8.5" | 1.25" | 2" | 1/2" | 60 lbs. | |
| *Recommended Amount | ||||||||||
Since 2004, American Fire Glass has produced high-end fire pit and patio items in California. Their products are popular among hotels, restaurants, casinos, and residential backyards. The company has grown to employ over 30 people in a 20,000-square-foot facility and has been recognized by INC as one of the fastest-growing companies. They offer limited lifetime warranties for their stainless steel items and have a diverse selection of fire pit glass media, outdoor fire pits, fire pit tables, and fireplaces.
Accessories
Check items to add to the cart or