Spotix Rectangle HPC Match Lit Fireplace U-Burner Kits
This burner can be installed DIY or by a professional installer and can be used for either Natural Gas or Propane applications; for LP applications a propane conversion kit, which includes an air mixer, coupler & nipple, will be necessary. The optional burner pan suspends the burner 3/4" above the fireplace floor, and measures 18" x 8"; the ends are 2" high and allow for pilot assembly mounting - it fits all size Dual Burners. The kit components include a whistle-free stainless steel gas flex line, quarter-turn ball valve, decorative flange & key, and stainless steel fittings; the fully assembled kit will complete the burner assembly from the burner to the shut off valve.
Features
- Stainless Steel Construction - Heavy duty 304 stainless steel guards against rusting and ensures a long-lasting product
- Staggered Burner Ports - Drilled, not punched, burner ports are staggered on the tube for a broader, more complete flame
- Standard Capacity - Burner rings are available in standard 1/2" capacity
- Natural Gas or Propane - Burner kit is NG ready, with LP conversion kit available; gas inlet is raised to prevent water entering gas line
- DSBP18 Burner Pan - Stainless steel burner pan helps complete the installation of your fire pit kit
- Includes - U burner, whistle-free stainless steel gas flex line, fittings, ball valve, and decorative flange with 3" key
| Manufacturer | Spotix |
|---|---|
| Manufacturer Part Number | FPS-DSB-KIT-Config |
| Burner Material | #304 Stainless Steel |
| Raised Center Hub | No |
| Burner Hub Size | 1/2 Inch |
| Burner Hole Pattern | Staggered |
| Burner Holes Drilled | Yes |
| Pan Type | Flat |
| Shape | Rectangle |
| Made in USA | No |
What to Consider When Building a Gas Fire Pit:
- Gas Supply - Before you begin designing your fire pit, first determine your gas supply
- Both Natural Gas and Propane may be used - Supply Pressure and BTU ratings need to be regulated for both
- For Natural Gas: Supply Pressure should be set between 3.5" - 7" Water Column
- For Propane*: Supply Pressure should be set between 8" - 11" Water Column
- *Do not use a burner rated for greater than 125,000 BTU with a 20-pound propane tank.
- Fire Pit Burner - The shape and size of your fire pit burner can be choosed after determining your gas supply
- Choose a burner kit based off of the inside dimension of your enclosure - the fire pit pan will be 6" larger than the burner to provide at least 3" between the edge of the burner and the inside edge of the pit
- Fire Pit Pan - Included with all of HPC's preassembled fire pit kits
- A pan can be flat or "bowl" style in order to accommodate your construction - it should be installed at least 3-4" below the top surface of your enclosure
- The burner pan separates the air mixer from the burner in propane applications, but in all constructions it helps with water drainage and ventillation
- Flange Extension - In many cases, the shut-off valve will be located inside the fire pit - if your enclosure walls are thicker than 3" it may be necessary to use a flange extension and a longer key
- An external shut off valve is not required with this kit, but may be an option for added safety
- Ventilation - For all fire pit burners, adequate ventilation is required
- The recommended amount of ventilation is 36in² - or (2) 18in² vents on two opposing sides to create proper airflow
- Installation Collars - Are designed to simplify the installation of a fire pit pan
- Our flexible installation collars can bend for round enclosures and can be anchored in with concrete screws
How Many Installation Collars Do I Need?
Round Pan Size (Diameter)*
Number of Collars
12”
2 Units
18”
3 Units
24”
4 Units
30”
5 Units
36”
6 Units
42”
7 Units
48”
8 Units
54”
9 Units
*NOTE: For square or rectangular enclosures, use enclosure length and width measurements
- Fire Media - Is the final step to finishing a gas fire pit
- Both lava rock and fire glass may be used to complete your fire pit, the choice between the two is purely aesthetic
| HPC Dual SS U-Burners | ||||||||
|---|---|---|---|---|---|---|---|---|
| Model # | Burner | Pan | ||||||
| Burner Size | Btu (max) | Hub Size | Flex Line Length | Center Flame | Dimensions | SKU | ||
| DSB-18 | 18x6" | 90k | 1/2" | 18" | 14" | 18"L x 8"W x 2"H | DSBP18 | |
| DSB-24 | 24x6" | 90k | 1/2" | 24" | 12" | 18"L x 8"W x 2"H | DSBP18 | |
| DSB-30 | 30x6" | 150k | 1/2" | 30" | 14" | 18"L x 8"W x 2"H | DSBP18 | |
| DSB-36 | 36x6" | 150k | 1/2" | 30" | 12" | 18"L x 8"W x 2"H | DSBP18 | |
| *Minimum Recommended | ||||||||
Spotix is an online leader in hearth, patio, and barbecue products. The company owns and operates six online stores as well as a product showroom located in North Liberty, Iowa, and they have been designated as one of the fastest-growing companies in the Eastern Iowa Corridor for several years running. In addition to offering convenient pre-packaged product kits, Spotix customer service agents are available to answer technical questions on thousands of available products to ensure customer satisfaction with each purchase.
