All products available on our website
qualify for free standard shipping. Standard
shipping applies to standard locations
within the contiguous 48 states. Spotix,
Inc. reserves the right to choose delivery
type, carrier, and service level of each
shipment when standard shipping is selected.
For freight shipments, standard shipping
includes curbside delivery and liftgate
services. Special considerations and fees
may apply to certain delivery exceptions
(e.g. deliveries to hard to reach areas).
Expedited shipping options:
Most items shipped via standard parcel
service may be expedited for an additional
cost to decrease shipping time or guarantee
delivery by a certain date. This does not
include processing time, which may or may
not be altered subject to manufacturer
resources and discretion. Items shipped via
freight are shipped at the fastest available
speed (Priority Freight) and are, therefore,
unable to be expedited further.
Fire by Design SCG2 Standard Capacity Dual-Pilot AWEIS Electronic Gas Fire Pit Ignition System provides a high quality component that can be used to complete a DIY fire pit project. The patented All-Weather Electronic Ignition System (AWEIS) features a reliable blend of technology and components to offer a simple and quick ignition to a gas fire feature. The 316 marine grade stainless steel control box safely houses the electronic components to withstand the elements in some of the most extreme wind, rain, and other inclement weather. The unit operates on either 24 VAC or 30 VDC power to start the hot surface igniters, which ignite the pilot lights. After the pilots are lit, the thermocouples sense the heat and transfer the electronic signal to open the main gas valve. NOTE: The power supply for this unit is not included and must be purchased separately if needed.
The AWEIS Standard Capacity is rated for a max BTU output of 290,000 BTU with a maximum inlet pressure of 0.5 PSI. The valve features 1/2-inch FPT fittings to connect with other gas components. The entire valve box measures 4.375 by 4.375 by 4.375 inches (W x D x H). This unit features a dual-pilot design.
Heavy-Duty Construction - 316 marine grade stainless steel control box safely houses electronic components
Hot Surface Ignition - Glow plug ignites gas for a simple, reliable start every time
Flame Sensing - Thermopile detects presence of flame and safely shuts off gas if flames are extinguished
Standard Capacity - Designed for medium fire features
Dual-Pilot Design - Secondary pilot design offers redundancy; Excellent in commercial applications
Beginning in 2005, Fire by Design started offering electronic ignition components for outdoor fire features using the same parts found in indoor units with a simple "weatherproof" box and labeled them as 'outdoor use'. Shortly after experiencing issues with the electronic components, founder Bob Roman realized he could develope a better automated outdoor ignition system. What he discovered was a better outdoor unit had to start with a superior "controller". After working with a local engineering firm and rigorous testing, Roman came up with the All Weather Electronic Ignition System (AWEIS for short) that provdied a unit that will operate in winds in excess of 55 mph and can even opearate when submerged in water - truly an impressive unit for the harshest of climates.