All products available on our website qualify for free standard shipping. Standard shipping applies to standard locations within the contiguous 48 states. Spotix, Inc. reserves the right to choose delivery type, carrier, and service level of each shipment when standard shipping is selected. For freight shipments, standard shipping includes curbside delivery and liftgate services. Special considerations and fees may apply to certain delivery exceptions (e.g. deliveries to hard to reach areas).
Most items shipped via standard parcel service may be expedited for an additional cost to decrease shipping time or guarantee delivery by a certain date. This does not include processing time, which may or may not be altered subject to manufacturer resources and discretion. Items shipped via freight are shipped at the fastest available speed (Priority Freight) and are, therefore, unable to be expedited further.
Learn moreHearth Products Controls FPS H Burner Match Light Gas Fire Pit Kit combines high quality construction and reliability to complete your gas fire pit project. The manual ball valve allows simple & reliable control over the flow of the gas while the pit can be ignited simply by taking a lighter or match to the burner as you slowly open the gas valve. The H-shaped burner is constructed from premium 304 stainless steel; each burner features staggered burner ports, a 1/2-inch female gas inlet, and is neatly machine welded to produce a seamless, durable product. This match lit kit from HPC also includes a flex line and necessary fittings for the flex line to valve connection. Burners and pans are also backed by a Limited Lifetime Warranty from HPC.
This burner can be part of a DIY project or be installed by a professional installer and can be applied to Natural Gas or Propane applications; for LP applications an optional burner pan is required. The burner should be at least 6" smaller than the inside dimensions of your pit enclosure and must be installed with the burner ports facing upward. The kit components include the stainless steel flex line, quarter-turn ball valve, flange & key and stainless steel fittings. The entire kit will complete the burner assembly from the burner to the shut off valve.
| Manufacturer | Hearth Products Controls |
|---|---|
| Manufacturer Part Number | FPS-HBSS-Config |
| Burner Material | #304 Stainless Steel |
| Raised Center Hub | Yes |
| Burner Hub Size | 1/2 Inch |
| Burner Holes Drilled | Yes |
| Shape | Rectangle |
| Made in USA | No |
How Many Installation Collars Do I Need? | |
Round Pan Size (Diameter)* | Number of Collars |
12” | 2 Units |
18” | 3 Units |
24” | 4 Units |
30” | 5 Units |
36” | 6 Units |
42” | 7 Units |
48” | 8 Units |
54” | 9 Units |
*NOTE: For square or rectangular enclosures, use enclosure length and width measurements | |
| HPC FPS Match Lit Rectangle H-burner Kits | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model # | Burner | Pan | Media | ||||||
| Burner Size | BTU (max) | Hub Size | Flex Line Length | Center Flame | Pan OD* | Center Hole* | Lava Rock* | Fire Glass* | |
| FPS/HBSB18 | 18x6" | 60k | 1/2" | 18" | 10" | 24x12" | 1-1/8" | 1 Cu Ft | 40 lbs |
| FPS/HBSB24 | 24x6" | 90k | 1/2" | 18" | 10" | 30x12" | 1-1/8" | 1 Cu Ft | 60 lbs |
| FPS/HBSB30 | 30x8" | 90k | 1/2" | 18" | 10" | 36x14" | 1-1/8" | 1 Cu Ft | 80 lbs |
| FPS/HBSB36 | 36x8" | 150k | 1/2" | 18" | 10" | 42x14" | 1-1/8" | 1 Cu Ft | 90 lbs |
| FPS/HBSB48 | 48x10" | 150k | 1/2" | 18" | 10" | 54x16" | 1-1/8" | 1 Cu Ft | 130 lbs |
| FPS/HBSB60 | 60x10" | 250k | 1/2" | 18" | 10" | 66x16" | 1-1/8" | 2 Cu Ft | 140 lbs |
| FPS/HBSB72 | 72x10" | 300k | 1/2" | 18" | 10" | 78x16" | 1-1/8" | 2 Cu Ft | 160 lbs |
| FPS/HBSB84 | 84x10" | 300k | 1/2" | 18" | 10" | 90x16" | 1-1/8" | 3 Cu Ft | 190 lbs |
| *Minimum Recommended | |||||||||
HPC is on the cutting edge of outdoor gas fire pit technology and offers a wide variety of burners to fit the need of any construction or do-it-yourself project. All HPC fire pit rings have staggered burner ports for a more natural - looking flame pattern and presence. Both stainless steel and cold rolled steel burners are available, and both feature ports that are drilled, not punched, for optimal quality; the burner hub is raised above the concentric rings to reduce the risk of water in the valve or gas line.
