Hearth Products Controls MLFPK Match Light Gas Fire Pit Kit, Interlink Pan
This burner kit is designed for both natural gas and propane applications, the burner will come assembled to the linear interlink pan. Also assembled will be the necessary fittings for the sealed control box attached with a flexible gas line; propane units will include a wire mesh spider guard to keep spiders from clogging the gas line.
The Small Tank Kit is for use with MLFPK models that are rated at 90,000 BTU or fewer. The kit includes a 90° regulator, 48 inch flex hose, 24 inch flex line, L-bracket and fittings for each respective model.
Features
- Stainless Steel Construction - Heavy duty 304 stainless steel burner & pan ensure a long lasting product
- Manual Ball Valve - Simple quarter turn ball valve controls gas flow
- Match Lit - Ignites simply with a match or lighter held to the burner
- T-Shaped Burner - Linear T shaped burner will offer a contemporary linear flame presence
- Natural Gas or Propane - Burner kit should be specified for natural gas or propane applications
- CSA Certified - Ensuring the highest quality and safety for outdoor gas fire pits
| Manufacturer | Hearth Products Controls |
|---|---|
| Manufacturer Part Number | LTBSS-MLFPK-L-FLEX-Config |
| Burner Material | #304 Stainless Steel |
| Raised Center Hub | Yes |
| Burner Hub Size | 1/2 Inch |
| Burner Hole Pattern | Staggered |
| Burner Holes Drilled | Yes |
| Pan Type | Trough |
| Shape | Linear |
| Made in USA | No |
What to Consider When Building a Gas Fire Pit:
- Gas Supply - Before you begin designing your fire pit, first determine your gas supply
- Both Natural Gas and Propane may be used - Supply Pressure and BTU ratings need to be regulated for both
- For Natural Gas: Supply Pressure should be set between 3.5" - 7" Water Column
- For Propane*: Supply Pressure should be set between 8" - 11" Water Column
- *Do not use a burner rated for greater than 125,000 BTU with a 20-pound propane tank.
- Fire Pit Burner - The shape and size of your fire pit burner can be choosed after determining your gas supply
- Choose a burner kit based off of the inside dimension of your enclosure - the fire pit pan will be 6" larger than the burner to provide at least 3" between the edge of the burner and the inside edge of the pit
- Fire Pit Pan - Included with all of HPC's preassembled fire pit kits
- A pan can be flat or "bowl" style in order to accommodate your construction - it should be installed at least 3-4" below the top surface of your enclosure
- The burner pan separates the air mixer from the burner in propane applications, but in all constructions it helps with water drainage and ventillation
- Flange Extension - In many cases, the shut-off valve will be located inside the fire pit - if your enclosure walls are thicker than 3" it may be necessary to use a flange extension and a longer key
- An external shut off valve is not required with this kit, but may be an option for added safety
- Ventilation - For all fire pit burners, adequate ventilation is required
- The recommended amount of ventilation is 36in² - or (2) 18in² vents on two opposing sides to create proper airflow
- Installation Collars - Are designed to simplify the installation of a fire pit pan
- Our flexible installation collars can bend for round enclosures and can be anchored in with concrete screws
How Many Installation Collars Do I Need?
Round Pan Size (Diameter)*
Number of Collars
12”
2 Units
18”
3 Units
24”
4 Units
30”
5 Units
36”
6 Units
42”
7 Units
48”
8 Units
54”
9 Units
*NOTE: For square or rectangular enclosures, use enclosure length and width measurements
- Fire Media - Is the final step to finishing a gas fire pit
- Both lava rock and fire glass may be used to complete your fire pit, the choice between the two is purely aesthetic
| HPC Match Lit Fire Pit Inserts | ||||||||
|---|---|---|---|---|---|---|---|---|
| Model # | Burner | Pan | Media | |||||
| Burner Size | BTU (max) | Hub Size | Center Flame | Pan OD | Lava Rock* | Fire Glass* | ||
| MLFPK25X8-L-FLEX | 24" | 50k | 1/2" | 10" | 25" x 8" | 1 Cu Ft | 30 lbs | |
| MLFPK37X8-L-FLEX | 36" | 65k | 1/2" | 10" | 37" x 8" | 1 Cu Ft | 40 lbs | |
| MLFPK49X8-L-FLEX | 48" | 65k | 1/2" | 10" | 49" x 8" | 1 Cu Ft | 50 lbs | |
| *Minimum Recommended | ||||||||
HPC is on the cutting edge of outdoor gas fire pit technology and offers a wide variety of burners to fit the need of any construction or do-it-yourself project. All HPC fire pit rings have staggered burner ports for a more natural - looking flame pattern and presence. Both stainless steel and cold rolled steel burners are available, and both feature ports that are drilled, not punched, for optimal quality; the burner hub is raised above the concentric rings to reduce the risk of water in the valve or gas line.
