Crossfire by Warming Trends CFBH-24VIK 24 Volt Electronic Spark Ignition H-Style Brass Gas Fire Pit Burner Kit
Crossfire by Warming Trends CFBH-24VIK 24 Volt Electronic Spark Ignition H-Style Brass Gas Fire Pit Burner Kit provides one of the most unique and innovative gas fire pit burner systems available. The heavy duty brass construction ensures an exceptionally high quality product that's designed for long lasting use outdoors while the unique Crossfire™ burner system features an innovative design that combines a specific air to gas mixture ratio to produce a taller, brighter flame. Intended for use with either propane or natural gas, these burners use close to half the fuel of conventional gas burners because of the unique regulation system. Available in a range of sizes and BTU ratings, the Crossfire™ H-style burner offers a corrosion resistant product backed by a full lifetime warranty.
This 24V electronic ignition system includes the spark igniter, control module, 24V transformer and ignition switch, and can include an optional flex line that measures 36-inches long, and an optional rectangular plate, to combine the necessary components to provide the burner system with an easy to use ignition. The electronic spark ignition system allows you to conveniently control the H-style burner kit with the simple push of a button.
Features
- Brass Burner Construction - Heavy duty brass burner construction ensures a corrosion resistant product
- Crossfire™ Burner Design - Innovative burner design with fuel regulation creates a brighter, taller flame presence
- Electronic Ignition Kit - 24V electronic spark ignition system features an easy on/off button to control the burner
- Fuel Efficiency - Unique design creates a fuel efficient burner that consumes half the fuel of conventional burners
- Includes - Crossfire burner, optional flat pan, optional 36-inch flex line, and electronic ignition control system
- Full Lifetime Warranty - Superior quality brass is backed by Warming Trends' Full Lifetime Warranty
- Natural Gas or Propane - Burner system should be specified for natural gas or propane applications
| Manufacturer | Warming Trends |
|---|---|
| Manufacturer Part Number | CFBH-24VIK-Config |
| Shape | Rectangle |
| Material | Brass |
| Ignition | 24 Volt Electronic Spark Ignition |
| Made in USA | Yes |
| Style | H-Style |
What to Consider When Building a Gas Fire Pit:
- Gas Supply - Before you begin designing your fire pit, first determine your gas supply
- Both Natural Gas and Propane may be used - Supply Pressure and BTU ratings need to be regulated for both
- For Natural Gas: Supply Pressure should be set between 3.5" - 7" Water Column
- For Propane*: Supply Pressure should be set between 8" - 11" Water Column
- *Do not use a burner rated for greater than 125,000 BTU with a 20-pound propane tank.
- Fire Pit Burner - The shape and size of your fire pit burner can be choosed after determining your gas supply
- Choose a burner kit based off of the inside dimension of your enclosure - the fire pit pan will be 6" larger than the burner to provide at least 3" between the edge of the burner and the inside edge of the pit
- Fire Pit Pan - Included with all of HPC's preassembled fire pit kits
- A pan can be flat or "bowl" style in order to accommodate your construction - it should be installed at least 3-4" below the top surface of your enclosure
- The burner pan separates the air mixer from the burner in propane applications, but in all constructions it helps with water drainage and ventillation
- Flange Extension - In many cases, the shut-off valve will be located inside the fire pit - if your enclosure walls are thicker than 3" it may be necessary to use a flange extension and a longer key
- An external shut off valve is not required with this kit, but may be an option for added safety
- Ventilation - For all fire pit burners, adequate ventilation is required
- The recommended amount of ventilation is 36in² - or (2) 18in² vents on two opposing sides to create proper airflow
- Installation Collars - Are designed to simplify the installation of a fire pit pan
- Our flexible installation collars can bend for round enclosures and can be anchored in with concrete screws
How Many Installation Collars Do I Need?
Round Pan Size (Diameter)*
Number of Collars
12”
2 Units
18”
3 Units
24”
4 Units
30”
5 Units
36”
6 Units
42”
7 Units
48”
8 Units
54”
9 Units
*NOTE: For square or rectangular enclosures, use enclosure length and width measurements
- Fire Media - Is the final step to finishing a gas fire pit
- Both lava rock and fire glass may be used to complete your fire pit, the choice between the two is purely aesthetic
| Warming Trends H-Style Crossfire™ 24V Electronic Ignition Burner Kit | |||||
|---|---|---|---|---|---|
| Model # | Burner Size | BTU Rating | Inlet Size | Optional Flex Line Size | Optional Pan Size |
| CFBH120 | 18" x 7" | 120,000 | 1/2" | 1/2"ID x 36" Length | 15" x 28" |
| CFBH160 | 24" x 9" | 160,000 | 1/2" | 1/2"ID x 36" Length | 17" x 34" |
| CFBH200 | 30" x 9" | 200,000 | 1/2" | 3/4"ID x 36" Length | 17" x 40" |
| CFBH240 | 36" x 9" | 240,000 | 1/2" | 3/4"ID x 36" Length | 17" x 46" |
| CFBH300 | 42" x 14" | 300,000 | 3/4" | 3/4"ID x 36" Length | 25" x 56" |
| CFBH340 | 48" x 14" | 340,000 | 3/4" | 3/4"ID x 36" Length | 25" x 62" |
| *Minimum Recommended | |||||
WARNING: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
