Crossfire by Warming Trends CFBL Match Light Linear Brass Gas Fire Pit Burner
SKU
CFBL-Config
Regular Price
$494.00
Special Price
$395.00
Features
- Brass Burner Construction - Heavy duty brass burner construction ensures a corrosion resistant product
- Crossfire™ Burner Design - Innovative burner design with fuel regulation creates a brighter, taller flame presence
- Linear Burner Shape - Contemporary linear shape designed for rectangular style fire pits
- Fuel Efficiency - Unique design creates a fuel efficient burner that consumes half the fuel of conventional burners
- Full Lifetime Warranty - Superior quality brass is backed by Warming Trends' Full Lifetime Warranty
- Natural Gas or Propane - Burner system can be specified to accommodate natural gas or propane applications
| Manufacturer | Warming Trends |
|---|---|
| Manufacturer Part Number | CFBL-Config |
| Shape | Linear |
| Material | Brass |
| Made in USA | Yes |
| Style | Linear |
Downloads
What to Consider When Building a Gas Fire Pit:
- Gas Supply - Before you begin designing your fire pit, first determine your gas supply
- Both Natural Gas and Propane may be used - Supply Pressure and BTU ratings need to be regulated for both
- For Natural Gas: Supply Pressure should be set between 3.5" - 7" Water Column
- For Propane*: Supply Pressure should be set between 8" - 11" Water Column
- *Do not use a burner rated for greater than 125,000 BTU with a 20-pound propane tank.
- Fire Pit Burner - The shape and size of your fire pit burner can be choosed after determining your gas supply
- Choose a burner kit based off of the inside dimension of your enclosure - the fire pit pan will be 6" larger than the burner to provide at least 3" between the edge of the burner and the inside edge of the pit
- Fire Pit Pan - Included with all of HPC's preassembled fire pit kits
- A pan can be flat or "bowl" style in order to accommodate your construction - it should be installed at least 3-4" below the top surface of your enclosure
- The burner pan separates the air mixer from the burner in propane applications, but in all constructions it helps with water drainage and ventillation
- Flange Extension - In many cases, the shut-off valve will be located inside the fire pit - if your enclosure walls are thicker than 3" it may be necessary to use a flange extension and a longer key
- An external shut off valve is not required with this kit, but may be an option for added safety
- Ventilation - For all fire pit burners, adequate ventilation is required
- The recommended amount of ventilation is 36in² - or (2) 18in² vents on two opposing sides to create proper airflow
- Installation Collars - Are designed to simplify the installation of a fire pit pan
- Our flexible installation collars can bend for round enclosures and can be anchored in with concrete screws
How Many Installation Collars Do I Need?
Round Pan Size (Diameter)*
Number of Collars
12”
2 Units
18”
3 Units
24”
4 Units
30”
5 Units
36”
6 Units
42”
7 Units
48”
8 Units
54”
9 Units
*NOTE: For square or rectangular enclosures, use enclosure length and width measurements
- Fire Media - Is the final step to finishing a gas fire pit
- Both lava rock and fire glass may be used to complete your fire pit, the choice between the two is purely aesthetic
| Warming Trends Linear Crossfire™ Burner Systems | ||||
|---|---|---|---|---|
| Model # | BTU Rating | Inlet Size | Burner Size | Recommended Opening Size* |
| CFBL90 | 90,000 | 1/2" | 18" | 6" x 20" |
| CFBL110 | 110,000 | 1/2" | 22" | 6" x 26" |
| CFBL130 | 130,000 | 1/2" | 26" | 8" x 32" |
| CFBL150 | 150,000 | 1/2" | 30" | 8" x 38" |
| CFBL190 | 190,000 | 1/2" | 38" | 8" x 44" |
| CFBL210 | 210,000 | 1/2" | 42" | 10"x 50" |
| CFBL250 | 250,000 | 1/2" | 50" | 10" x 56" |
| CFBL270 | 270,000 | 1/2" | 54" | 12"x 62" |
| *Minimum Recommended | ||||
About the Manufacturer
A family owned and operated business, Warming Trends specializes in manufacturing their innovative Crossfire™ Brass Burner Systems. Their state-of-the-art burner has reimagined the capabilities of backyard gas fire features by using a specific air-to-gas mixture that produces a taller, brighter flame - all while using half the fuel of conventional gas burners. All of their work is done in Colorado to ensure the highest standards using only the best quality materials so you can rest assured they stand behind their products - complete with a full lifetime warranty.
Accessories
Check items to add to the cart or
