All products available on our website
qualify for free standard shipping. Standard
shipping applies to standard locations
within the contiguous 48 states. Spotix,
Inc. reserves the right to choose delivery
type, carrier, and service level of each
shipment when standard shipping is selected.
For freight shipments, standard shipping
includes curbside delivery and liftgate
services. Special considerations and fees
may apply to certain delivery exceptions
(e.g. deliveries to hard to reach areas).
Expedited shipping options:
Most items shipped via standard parcel
service may be expedited for an additional
cost to decrease shipping time or guarantee
delivery by a certain date. This does not
include processing time, which may or may
not be altered subject to manufacturer
resources and discretion. Items shipped via
freight are shipped at the fastest available
speed (Priority Freight) and are, therefore,
unable to be expedited further.
Hearth Products Controls FPS Rectangle Match Light Gas Fire Pit Kit combines high quality construction and reliability to complete your gas fire pit project. The manual ball valve allows simple & reliable control over the flow of the gas while the pit can be ignited simply by taking a lighter or match to the burner as you slowly open the gas valve. The rectangle shaped burner is constructed from premium 304 stainless steel; each burner features staggered burner ports, a 1/2-inch or 3/4-inch female gas inlet, and is neatly machine welded to produce a seamless, durable product. This match lit kit from HPC also includes a flex line and necessary fittings for the flex line to valve connection. Burners and pans are also backed by a Limited Lifetime Warranty from HPC.
This burner can be part of a DIY project or be installed by a professional installer and can be applied to Natural Gas or Propane applications. The burner should be at least 6" smaller than the inside dimensions of your pit enclosure and must be installed with the burner ports facing upward. The kit components include the stainless steel flex line, quarter-turn ball valve, flange & key and stainless steel fittings. The entire kit will complete the burner assembly from the burner to the shut off valve.
Stainless Steel Construction - Heavy duty 304 stainless steel burner ensures a long lasting product
Staggered Burner Ports - Drilled burner ports staggered on tube for a broad, complete flame
Standard & High Capacity - Burners are available in both standard 1/2-inch and high 3/4-inch capacity
Match Lit - Ignites simply with a match or lighter held to the burner
Natural Gas or Propane - Natural gas ready, LP conversion available
Includes - Rectangle burner, flex line, fittings, ball valve, and decorative flange & key
What more do you need? Depending on your project you might need installation collars, a flange extension, a longer key, a regulator, vents, a pan, or fire media - feel free to give our sales team a call!
Gas Supply - Before you begin designing your fire pit, first determine your gas supply
Both Natural Gas and Propane may be used - Supply Pressure and BTU ratings need to be regulated for both
For Natural Gas: Supply Pressure should be set between 3.5" - 7" Water Column
For Propane*: Supply Pressure should be set between 8" - 11" Water Column
*Do not use a burner rated for greater than 125,000 BTU with a 20-pound propane tank.
Fire Pit Burner - The shape and size of your fire pit burner can be choosed after determining your gas supply
Choose a burner kit based off of the inside dimension of your enclosure - the fire pit pan will be 6" larger than the burner to provide at least 3" between the edge of the burner and the inside edge of the pit
Fire Pit Pan - Included with all of HPC's preassembled fire pit kits
A pan can be flat or "bowl" style in order to accommodate your construction - it should be installed at least 3-4" below the top surface of your enclosure
The burner pan separates the air mixer from the burner in propane applications, but in all constructions it helps with water drainage and ventillation
Flange Extension - In many cases, the shut-off valve will be located inside the fire pit - if your enclosure walls are thicker than 3" it may be necessary to use a flange extension and a longer key
An external shut off valve is not required with this kit, but may be an option for added safety
Ventilation - For all fire pit burners, adequate ventilation is required
The recommended amount of ventilation is 36in² - or (2) 18in² vents on two opposing sides to create proper airflow
Installation Collars - Are designed to simplify the installation of a fire pit pan
Our flexible installation collars can bend for round enclosures and can be anchored in with concrete screws
How Many Installation Collars Do I Need?
Round Pan Size (Diameter)*
Number of Collars
*NOTE: For square or rectangular enclosures, use enclosure length and width measurements
Fire Media - Is the final step to finishing a gas fire pit
Both lava rock and fire glass may be used to complete your fire pit, the choice between the two is purely aesthetic
HPC is on the cutting edge of outdoor gas fire pit technology and offers a wide variety of burners to fit the need of any construction or do-it-yourself project. All HPC fire pit rings have staggered burner ports for a more natural - looking flame pattern and presence. Both stainless steel and cold rolled steel burners are available, and both feature ports that are drilled, not punched, for optimal quality; the burner hub is raised above the concentric rings to reduce the risk of water in the valve or gas line.
WARNING: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.